Distribution amplifier.
12 channels / 6 zones
Anthem MDX-12
Specifications
Channels / Zones - 12 Channels / up to 6 Zones
Output Power - Coming soon (estimated at 75W/channel at 8 ohm / 150W/channel at 4 ohm)
Frequency Response - 20Hz - 20kHz (±0.4dB) at 8 Ohm
Inputs (analog) - 6x RCA pairs (left/right), 2x RCA pairs (buss left/right)
Input (trigger) - 1x 3.5mm (5 – 24V DC/AC)
Outputs (speaker level) - 6x removable Phoenix connectors (left/right) accommodates cable up to 12AWG
Outputs (other) - 1x 3.5mm trigger loop, 2x RCA pairs (left/right buss)
Controls (rear panel) - Power Mode: Auto, Trigger,Continuous Operation; Input Gain (per zone); Factory Reset (pinhole); Input Selection (per zone); Bridge Mode (per zone)
ARC Genesis Calibration - NO
Microphone (for ARC Genesis) - NO
Installation (setup) - NO
IP Control (via IP or RS-232) - NO
AC Voltage - 120V~50/60Hz
Rack mount brackets & feet - Included
Used space of a ''rack mount'' (without feet) - 1U
Dimensions (H x W x D, with stand) - 1.75" x 17.0" x 16.6" (4.45 × 43.18 × 42.16 cm)
Weight - 16 lbs. (7.26kg)
Included Accessories - Power Cable, Rack Mount Ears, 3.5mm Trigger Cable, Warranty Card, Quick Start Guide, T10 Torx Bit