Anthem M1

Amplified Output Power

1 Channel

8 ohms - 1,000W/channel

4 ohms - 2,000W/channel

3 ohms - 2,400W/channel

2 ohms - >2000W/channel (depending on power line regulation)

Frequency Response

open circuit - ± 0.1 dB

8 Ω - ± 0.1 dB

4 Ω - ± 0.1 dB

2 Ω - ± 0.2 dB

Power Bandwidth 1000 W at 8 Ω - 5 Hz to 45 kHz

THD+N at 1 kHz, 8 Ω

1W - 0.01%

10W - 0.01%

100W - <0.03%

1,000W - <0.06%

IMD 19 kHz + 20 kHz, CCIF - 0.003%

S/N Ratio ref. 1000 W, IEC-A - 113 dB

Voltage Gain - 29 dB

Input Sensitivity - 100 mV for 1 W output, 3.2 V for 1000 W output (8 Ω)

Input Impedance - 10 kΩ (RCA), 20 kΩ (XLR)

Damping Factor - 800 to 1400 depending on frequency

XLR Configuration - Pin 1: Ground, Pin 2: Positive, Pin 3: Negative

Power Consumption

Typical Load - 300W

standby mode, 120V hands - <1W

standby mode, 240V hands - <2W

operate mode, idle - 33W

Dimensions & Weight

Height (with feet) - 2 1/4 inches (5.7 cm)

Height (without feet) - 1U

Width (with handles) - 19 1/4 inches (49 cm)

Width (without handles) - 19 inches (48.3 cm)

Depth - 18 3/4 inches (47.6 cm)

Weight - 20 lbs (9 kg)